Two-component resins

Colour

Red

Reactor

RE2000 70 g, RE2000 350 g

Class

F

Drying time

24 h at 20 ℃

Packaging

1kg, 5kg

Description Dolphon CR-1035 is a low-viscosity, filled two-component epoxy resin for potting and encapsulating transformers, electrical windings and components. It forms a tough, homogeneous, resistant layer with excellent dielectric properties, low moisture absorption and chemical resistance. The resin penetrates well under vacuum, spreads evenly and stays stable in demanding conditions.

Colour

Black

Reactor

RE2000 50 g, RE2000 250 g, RE2000 1250 g

Class

F

Drying time

24 h at 20 ℃

Packaging

1kg, 5kg, 25kg

Description Dolphon CB-1078 is a black two-component epoxy resin with high thermal conductivity, intended for potting and encapsulating electrical and electronic assemblies such as windings, stators, transformers and sensors. It forms a tough, homogeneous layer with excellent electrical and mechanical properties, including high moisture resistance, low shrinkage and good chemical stability. The resin has low thermal expansion, good impact resistance and can cure at room temperature.

Colour

Clear

Reactor

RE2000 100 g, RE2000 500 g, RE2000 1000 g

Class

F

Drying time

24 h at 20 ℃

Packaging

1kg, 5kg, 20kg

Description Dolphon CV-1024/A is a medium-viscosity two-component epoxy resin for potting and encapsulating electrical windings, transformers and electronic assemblies. It forms a tough, homogeneous, resistant layer with good dielectric properties, low moisture absorption and stable service. The resin penetrates well, drips little during baking and resists chemical agents well.

Colour

Red

Reactor

RE2000 50 g, RE2000 250 g

Class

F

Drying time

24 h at 20 ℃

Packaging

1kg, 5kg

Description Dolphon CR-1034 is a red two-component epoxy coating resin with a thixotropic consistency, intended for precise application with a spatula. It forms a tough layer with excellent electrical properties, high resistance to chemical agents and low moisture absorption. It is ideal for impregnating and encapsulating motors, stators and windings, giving long-lasting protection in demanding industrial conditions.

Black

Component

Base A CB-1114A

Class

H

Drying time

24 h at 20 ℃

Packaging

5kg, 25kg

Neutral

Component

Base B CC-1114B

Class

H

Drying time

24 h at 20 ℃

Packaging

650 g

Yellow

Component

Base A CY-1114A

Class

H

Drying time

24 h at 20 ℃

Packaging

5kg, 25kg

Blue

Component

Base B CX-1114B

Class

H

Drying time

24 h at 20 ℃

Packaging

650gr, 25kg

Description Dolphon C(A)-1114 is a filled, halogen-free, self-extinguishing and self-bonding two-component epoxy resin for encapsulating and impregnating electrical components such as windings, transformers and capacitors. It forms a tough, homogeneous layer with excellent electrical and mechanical properties, low cure shrinkage and good moisture resistance. The resin offers exceptional resistance to thermal cycling, good heat dissipation and compliance with UL 94-V0 for self-extinguishing. It is also approved for thermal class H (180 °C) applications and is included in a UL insulation system. It comes in two colours of the final homogeneous mass, green and black.

Black

Component

Base A CB-1138A

Class

F

Drying time

24 h at 20 ℃

Packaging

1kg, 5kg, 25kg

Amber

Component

Base B CB-1138B

Class

F

Drying time

24 h at 20 ℃

Packaging

160gr, 800gr

Description Dolphon CB-1138 is a black, self-extinguishing, halogen-free two-component polyurethane resin for potting and protecting electrical and electronic components such as PCB assemblies, sensors, motors, transformers and relays. It forms an elastic, tough, homogeneous layer with excellent dielectric properties, high resistance to moisture and chemical agents, and low shrinkage. The resin has low thermal expansion, good impact resistance and cures at room temperature, or faster at elevated temperatures.

Colour

Clear

Component

Base A CN-1130A (packaging: 1 kg), Base B CN-1130B (packaging: 100 g)

Class

F

Drying time

24 h at 20 ℃

Description Dolphon CN-1130 is a two-component elastic resin based on polybutadiene, intended for potting, encapsulating and protecting electrical and electronic assemblies where flexibility and toughness matter. It forms an elastic, self-extinguishing layer with very low shrinkage and minimal internal stress. The resin offers excellent resistance to moisture and chemical agents, good adhesion and fast curing.

Colour

Clear

Component

Base A X206A, Base B X206B

Class

F

Drying time

24 h at 20 ℃

Packaging

1 kg

Description Dolphon X-206 is a clear two-component epoxy resin (adhesive) suitable for coating and bonding in electrical applications. It forms a tough, chemically resistant layer with good dielectric and mechanical properties and resistance to moisture and solvents. The resin has a relatively high viscosity (10 000–15 000 mPa·s) and can be used as a liquid coating or as an adhesive.

Yellow

Component

Base A CW-1081A

Class

F

Drying time

24 h at 20 ℃

Packaging

5 kg

Blue

Component

Base B CW-1081B

Class

F

Drying time

24 h at 20 ℃

Packaging

5 kg

Description Dolphon CW-1081 is a two-component epoxy resin for protecting electric motors, applied by spraying. It forms a tough but slightly elastic layer with very good resistance to moisture, abrasion and chemicals. The resin has a thixotropic structure (it does not run when applied), is simple to use and cures at room temperature or slightly elevated temperature.

Colour

Black

Reactor

RE2018 150 g

Class

F

Drying time

24 h at 20 ℃

Packaging

1kg, 5kg

Description Dolphon CB-1109 is a two-component polybutadiene resin for potting and protecting electrical and electronic components. It forms an elastic, flexible layer with good dielectric properties, low thermal conductivity and high resistance to mechanical stress and temperature changes. The resin is exceptionally easy to work, spreads evenly, cures at room temperature and stays stable in demanding operating conditions.